Roof Systems in Kenosha, WI
Commercial roof systems in Kenosha, WI: single-ply, modified bitumen, built-up, metal, foam and coatings, with the failure signs and winter findings for each.
How We Approach Roof Systems
A probe that slides under a seam edge by a quarter inch is the same finding on any membrane, but what it means depends on the system. On a welded sheet it points to a failed weld. On a torch-applied lap it points to a cooled bond. In Kenosha, WI, where winter brings about 36.2 inches of snow and a record low of minus 31 degrees, every system is tested by movement, and the record shows which details open first.
Single-Ply Membranes
TPO, PVC, EPDM and KEE are the sheet systems. Welded or adhered seams are the first place we look, then flashings at walls and curbs. Each type has its own repair method, and the inspection log names the type so the right method is used.
Thermoplastic sheets are welded with hot air, and thermoset sheets are joined with adhesives or tapes, so the repair for an open seam differs between them. A white membrane also changes how the roof handles summer sun, and the report notes the surface and its cleaning needs. Flashing terminations at parapets and curbs are checked on every visit.
All Roof Systems
Choose a page below for the details, or call 555-555-5555 and tell us about the building.
TPO Roofing
PVC Roofing
EPDM Roofing
KEE Roofing
Modified Bitumen Roofing
Built-Up Roofing
Standing Seam Metal Roofing
Metal Roof Retrofit
Spray Polyurethane Foam Roofing
Silicone Roof Coatings
